SWS 105. User s manual. Návod k obsluze. Návod na obsluhu. Használati útmutató. Instrukcja obsługi EN CZ SK HU PL - PDF

Description
SWS 105 User s manual Návod k obsluze Návod na obsluhu Használati útmutató Instrukcja obsługi WEATHER STATION WITH 2-DAY WEATHER FORECAST METEOROLOGICKÁ STANICE S 2DENNÍ PŘEDPOVĚDÍ POČASÍ METEOROLOGICKÁ

Please download to get full document.

View again

of 26
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Screenplays & Play

Publish on:

Views: 137 | Pages: 26

Extension: PDF | Download: 0

Share
Transcript
SWS 105 User s manual Návod k obsluze Návod na obsluhu Használati útmutató Instrukcja obsługi WEATHER STATION WITH 2-DAY WEATHER FORECAST METEOROLOGICKÁ STANICE S 2DENNÍ PŘEDPOVĚDÍ POČASÍ METEOROLOGICKÁ STANICA S 2-DŇOVOU PREDPOVEĎOU POČASIA METEOROLÓGIAI ÁLLOMÁS KÉTNAPOS IDŐJÁRÁS-ELŐREJELZÉSSEL STACJA METEOROLOGICZNA Z DWUDNIOWĄ PROGNOZĄ POGODY EN CZ SK HU PL MUST READ BEFORE GETTING STARTED Your Meteotime Weather Station is different to traditional weather stations which measure the prevailing conditions only, the data of this weather station is based on the METEOTIME which is worked out on a daily basis by highly professional meteorologists using state-of-art instruments. The Metotime Weather Station is engineered in such a way that it is able to receive the coded METEOTIME signal containing the weather information. The information is broadcasted via the stations for radio controlled clocks DCF77 (located in Germany). For this reason, your Meteotime Weather Station is also a radio controlled clock with all the known advantage, such as always showing the exact time, and automatic change to daylight saving time in winter and in summer. You are able to receive weather forecasts for 90 meteorological regions within Europe for up to 4 days in advance, and offer a 2-day-advance forecast for an additional 30 regions. WHAT DOES IT TAKE TO GET GOOD RECEPTION? Similar to wireless signals like the mobile phone network or Radio/TV broadcasts, it is possible that the Meteotime weather stations do not receive signals all the time and everywhere. The following are some tips you should follow by all means to make sure that your device works properly: The location for Meteotime weather station is very important. For this reason we have equipped all of them with an innovation test function (the TEST button) which enables you test the quality of reception in your environment and to place the device where the best conditions prevail. Try your reception by testing your Meteotime weather station as stated in the manual. To do this, in the room you want to install the device, please turn on all the potential sources of interference (for example, a TV set). Then put themeteotime weather station in the place and direction you want it to be, but always at least in one meter from the potential source of interference. EN 1 Watch the symbol GOOD RECEPTION or BAD RECEPTION on the display. Once you have found the right location for GOOD RECEPTION, you may leave the Meteotime weather station there, it will collect its data by radio controlled signal. Within a few minutes time and the date will appear. However, the transfer of the very large amount of data (forecast for all regions and days) will take much longer. To completely receive all data will take up to 24 hours from the time of the initial setup. POTENTIAL SOURCES OF INTERFERENCE With all Meteotime weather stations, we should take measures to provide best possible radio reception. DCF is long wave stations with a broad reach (for example, approximate 1500km for the DCF station). However, as with a long wave radio station, interference may occur which is often caused by the following infl uences : In buildings with lots of concrete, metal parts and the electrical equipment you may get reception problems (for example, in shopping centers and at exhibitions). Electronic equipment such as TVs, computers, household machines, etc or transformers, power lines, radio transmitters and trains are potential sources of interference. Atmospheric infl uences might affect the radio waves. The distance from the station and the geographic conditions (mountains, etc.) also affect the reception. Due to their great distance from the station, areas like Southern Italy or Northern Scandinavia are critical. So-called (dead-spots) which make reception impossible can appear everywhere. There is less interference in rural area than in heavily built-up urban ones. On principle at night the sources of interference are less active, consequently reception is better than during the day. Week batteries in the device will lower the quality of reception. DATA TRANSFER METEOTIME sends the data during precisely defi ned time slots in accordance with UTC. (UTC, i.e. for Central Europe during the winter UTC+1, during the summer UTC+2; for Great Britain and Portugal during the winter UTC, during the summer UTC+1) EN 2 Transmission times (UTC) Forecast for 10:00 p.m. 03:59 a.m. the actual (new) day (TODAY) 04:00 a.m. 09:59 a.m. the next day (TOMORROW) In the even that the reception during the above time slots is completely or at times interfered with or has broken down, these forecasts, or parts of them, will be missing. This package comes with a main unit which is Meteotime color display Weather Station, and a remote outdoor Thermo Hygrometer sensor. This Meteotime Weather Station has equipped the thermometer to measure the indoor temperature, and also has a wireless outdoor sensor with 3 channels to measure outdoor temperature. KEY FEATURES: Weather Status for today and tomorrow for 470 cities Rain/Snow/Hail Probability for today Wind Speed and Wind Direction for today 3 channel outdoor 433MHz wireless Thermo Hygrometer Indoor Thermo Hygrometer Maximum and minimum memories of temperature readings Regional Day-time temperature and Night-time Temperature information 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch / Swedish/ Deutsch) Critical Weather Alert 5 Selected cities Information. Radio-controlled Clock and Calendar (24 hours format only) Time-zone setting Powered by Build in lithium-ion battery and 2 x AAA batteries for the outdoor sensor Dual alarm (weekday alarm/single alarm, Alarm sound for 2 minutes) Pre- alarm (Programmable) for outdoor sensor Channel 1 only. Battery Low Indicator for Main Unit and Wireless Sensor Motion sensor for switching the display of Today/Tomorrow weather information Auto Light function to adjust a proper light intensity EN 3 INTRODUCTION The Meteotime Weather Station LCD display shows: Today Weather Information Window In/Outdoor Temperature and humidity Information Window which shows Date, Alarm time, Cities, and Critical Weather Information Description Today or Tomorrow (shift) Information including Winf Speed, Wind Direction, and the probability of Rain/Snow/Hail, Day & Night Temperature, Day & Night Weather Status. 2 Motion sensor for switching the display of Today/Tomorrow weather information 3 In/Outdoor Temperature/humidity 4 Auto Light function to adjust a proper light intensity 5 Information Window EN 4 1 2 1 Main Unit 2 Remote Thermo Hygrometer There are total 8 buttons on the Main Unit, namely: DAY/NIGHT Critical Whether Information Time + Date Day/Night Weather Status Change Read the critical weather information one by one. CHANNEL Switch to read Outdoor Thermometer channel 1,2, 3 or IN Press and Hold key for 3 seconds to enter into display mode MEM display the maximum and minimum measured Temperature in record Press and Hold for 3 seconds to clear all the Max. and Min. record Edit your home town EN 5 SET Selected Date &Time City Week Alarm time OFF W-ALM Single alarm OFF S-ALM Pre-Alarm OFF P-ALM Press and HOLD [SET] for 3 seconds to select your 1 Country, 2 Time Zone, 3 Language, 4 Exit to city display mode increasing the value during setting Turn ON alarm Press and Hold for 3 seconds to force RC Clock receiving Shift Tomorrow Weather information on LCD and the DAY tcon fl eshing. decreasing the value during setting Chose one of the pre-selected cities Turn OFF alarm Press and Hold for 3 seconds to force to search for outdoor sensor ON/OFF RESET ON/OFF RESET TEST Find the place for the device which has a good reception Add the city into the list of your desired cities OR Remove the city out of the list of desired Cities Edit your home town MOTION SENSOR Move your hand before the sensor, to shift Tomorrow Weather information on LCD and the DAY icon fl ashing. EN 6 GETTING STARTED To turn on the weather station, proceed according to these instructions: Push down the button on the device using a paper clip or a thin item until an audible click is heard. When the Power button clicks in, the device will be fully functional. To turn off the weather station, proceed in the same manner. The Power button will then release to the default position. Insert 2 pcs AAA batteries for remote sensor. The main unit will automatically scan for the radio-controlled clock signal and the Meteotime Weather signal. The time and date signal will be received in a few minutes. Since there is a large amount of Weather information for all regions and days, the unit needs about 24 hours from the time of the initial setup to complete the reception of all data After the time and date signal is being received successfully, it shows SELECT COUNTY and then FRANKFURT as default city in the information window. To change the Country and the City please see the information below. If the unit is able to receive the Meteotime signal successfully, the Meteotime icon is appeared in the second row of display. Otherwise, the Meteotime will be. EN 7 1 2 1 means it is able to receive the Meteotime weather signal. Otherwise, it will be 2 means it successfully receives today s weather information. Otherwise, it will be In the event the Meteotime icon change to, that means there are potential sources of interference on the unit. The sources of interference may come from the electronics equipment such as TV-set, computers, household machines etc. It may also be due to lots of concrete, metal parts and electrical equipment in the building. It may also be due to your living area if it is very far away from the Radio-controlled clock tower. You are able to use the TEST function to look for a better location Press TEST button, SCAN is shown in the Information Window. EN 8 Pick the unit to fi nd a good location. fl ashing: The test is running and the Meteotime signal reception is good. You are able to leave the device in this position. fl ashing: The test is running and the Meteotime signal reception is poor. You need to keep on looking for a better location. The test lasted for around 1 minute. You can restart the test with the [TEST] key at any time, and also discontinue the test by press the [TEST] key. Scan A: that A means the reception quality should be 0=bad..9=very good SWITCH CITY ALARM TIME TIME&DATE After inserting the batteries, the weather station searches for the Radio controlled Time signal as well as the MeteoTime signal. After it has successfully received the MeteoTime signal, the information windows the default city. You are able to press [SET] to switch from the display of the City to week alarm, single alarm or pre-alarm or date for Frankfurt am Main. SELECT THE COUNTRY AND CITY / CITIES Press and Hold [SET] for 3 seconds, in the information window, is shown, and then press [ ] or [ ] key to select the country. For example, if you see in the information window, that means you have selected Germany. Press [SET] key to confi rm the Country. Assuming you have selected Germany, then the information window will show. Then, press [ ] or [ ] key to select the city, and the city name will be shown in the information window. Example: means the city Frankfurt am Main. If Frankfurt am Main is your selection as one of your favorite cities, then press [TEST ] to confi rm. A will be shown on top of your selected city, and it will be stored into your personal memory list. EN 9 Then, you are able to press [ ] or [ ] to select more cities in the same country, and then press [TEST ] to confi rm. You may select maximum FIVE cities to display. If you want to add more cities, then will be shown in the information window. OR Press[SET] key to quit, and EXIT will shown at the information window. REMARK: If after inserting the batteries the fi rst time, you are skipping the city selection, the product will select by default Frankfurt am Main as your selected city. DISPLAY OF FAVOURITES If you have selected more than one city. Let said have select Frankfurt am Main, Koln and Munster in your desired city list, then you are able to press [ ] key when the information window shows the CITY NAME (Press SET until it displays the City Name). When you select the other select, the weather information will be of this selected city REMOVE YOUR SELECTED THE CITY/ CITIES OUT OF MEMORY LIST Press and hold [SET] for 3 seconds, is shown in the information window, then press [ ] or [ ] key to select the country. For example, you had selected the country name such as means Germany. Press [SET] key to confi rm the country.(let s said we select Germany right now), and then the information window will show Then, press [ ] or [ ] to go to your selected city, let s said Frankfurt am Main, and the will show in the information window Press [TEST ] to remove the, and this city is successful remove out of your list of preference cities you had selected. Repeat this if you wish to remove more cities from your list EN 10 Then, you are able to press [ ] or [ ] key to select more cities, and then press [TEST ] to remove your selected cities. OR Press[SET] key to quit, and EXIT will shown at the information window. After 4 seconds, it will go to the City Date-Time Mode. PERSONALIZED A PLACE NAME Press and hold [SET] for 3 seconds, In the information window, is shown, and then press [ ] or [ ] to select the country. For example, let s said you had selected country Germany which is represen ted in Press [SET] key to confirm the Country. (let s said we selectgermany right now), then the information window will show. Then, press [ ] or [ ] key to select the city, and the city name will be shown in the information window such as means city Frankfurt am Main, and you would to enter a new city which is near the region of Frankfurt am Main Press the [MEM] key ; a cursor fl ashes on the fi rst position of the Information Window Then following input commands then apply: KEY Function or Selection of a letter SET 1 Accept the selected letter and jumps to the next position. OR 2 If you have not entered any letter (in other words, if only the cursor is fl ashing at the last position), confi rm the entry with this key and your place will also be included in the memory with immediate effect TEST One position back in the data entry process ** The place that you have selected to enter your own description will still exist under its own name. Press [SET] key to confi rm and exit EN 11 SET THE TIME ZONE AND LANGUAGES Press and hold [SET] for 3 seconds, is shown in the information window. Press [SET] again, then is shown in the information window, press [ ] or [ ] key to adjust the time zone. Press [SET] again, then the LANGUAGE will be shown in the information window, press [ ] or [ ] key to select your desired language. There are total seven languages for selection, namely German, English, Spanish, French, Italiano, Dutch, Swedish Press [SET] on last time, will be shown in the information window. After 4 seconda, it will change to the City-Date-Time Mode REMARK: If you do not have any selection into the Setup mode up to 30 seconds, it will automatically exit the setup mode. The Information Window will show City/ Date & Alarm SWITCH DAY WEATHER INFORMATION SSÀ NIGHT WEATHER INFOR- MATION The device is able to automatically switch to DAY-WEATHER and NIGHT- WEATHER respectively. The user can press [DAY/NIGHT] button to see the DAY-Weather (for 10-second period) if currently show the NIGHT- WEATHER, or vice verse. EN 12 DAY/NIGHT CRITICAL WEATHER INFORMATION Meteotime Weather signal contains the Critical Weather Information such as Gust, Frozen Rain, Heavy Snow, Thunder, Strong UV, Dense Fog, Bise, Mistral, etc. for today and coming three days. A critical weather alert signal will be turned on in case that day has critical weather that the user must know. EN 13 Sometimes there are more than one critical weather information in the 4-days. Press [DAY/NIGHT] key to read the critical weather information one by one. The special icon of the day will be fl ashed when you read the Information. EN 14 WEATHER WEATHER WEATHER DAY NIGHT Weather status Press [SET] key to go back to the display of CITY DATE WEEKDAY ALARM SINGLE ALARM PRE-ALARM. If you would like to read the weather Information in the information window, then press [DAY/NIGHT] key to display Day Night weather information and also the Critical Weather Information. EN 15 If no key is pressed, the critical weather information will be toggle to display, so as to make sure you are aware of the critical weather details. OUTDOOR TEMPEATURE READING The wave display indicates the reception of the remote unit is in good order. If no readings are received from the remote unit for more than two minutes, blanks will be displayed until further readings are successfully searched. Checked the remote unit is sound and secure. You can wait for a little while or Hold DOWN ( ) button for 2 seconds to enforce an immediate search. The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: Icon Status Searching for the signals from the remote sensor Corresponding remote sensor signal received successfully No signals VIEWING REMOTE (CHANNEL) TEMPERATURE Static Display: Press [CHANNEL] keys to select measurements from different remote sensors, each is mode to a unique channel 1,2, 3 or IN EN 16 Channel Auto-Scan Display: Press To enable an automatic scan of all channels, press and hold CHANNEL, until the icon is displayed. The measurements from each remote channel will be alternatively displayed with a 5 seconds viewing. NOTE: The channel auto-scan feature can be active only if there are more than one remote sensors operating and are set to different channels. MAXIMUM AND MINIMUM TEMPERATURES The maximum and minimum recorded indoor and outdoor temperatures and humidity will be automatically stored in the memory of the main unit. Press [MEM] button, the respective indicators, [MAX] or [MIN] will then be displayed. To clear the memory, hold [MEM] button for 3 seconds. The maximum and minimum temperature records will be erased. ALARM FEATURE There are three time alarms available on the main unit: Weekday Alarm The alarm sound will be activated and the icon will fl ash on weekdays (Mo to Fr) when it is armed and the alarm time is reached. Single Alarm The alarm sound will be activated and the icon will fl ash when it is armed and the alarm time is reached. Once it fi nished, it will be disabled automatically Pre-Alarm The pre-alarm will be activated and the icon will fl ash if the temperature of Channel 1 is falling to +0 or below. It is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single alarm time. EN 17 HOW TO SET ALARM Press [SET] button to toggle between weekday alarm, single alarm or pre-alarm. If the alarm is disarmed, the time will be displayed as OFF W-ALM Hold[SET] button for 3 seconds, the hour digits will blink. Enter the hour by using UP [ ] or DOWN [ ] button. Press[SET]button to confi rm, the minute digits will blink. Enter the hour by using UP [ ] or DOWN [ ] button. Press[SET] button to exit and the respective alarm icons [ ], [ ] and [ ] will be activated. SNOOZE FUNCTION When alarm is on, swing your hand on above the motion sensor, alarm will be stopped temporarily and the alarm icon fl ashing. The alarm will sound again after 4 minutes. HOW TO STOP ALARM When alarm is on, the respective alarm icons [ ] and [ ] will be flashing. Press UP [ ] or DOWN [ ] button to stop the alarm immediately. To turn off the alarm, press UP [ ] or DOWN [ ] button to change the alarm time display as OFF W-ALM If no button is pressed, the alarm will be sounded for 2 minutes and then deactivated automatically. EN 18 Significance Day Night Sunny (Clear at night) Light Cloudy Mostly Cloudy Overcast Stratus Clouds Fog Showers Light R
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks