Production of alfalfa hay under different drying methods 1. Produção de feno de alfafa sob diferentes métodos de desidratação - PDF

Revista Brasileira de Zootecnia 2010 Sociedade Brasileira de Zootecnia ISSN Production of alfalfa hay under different drying methods 1 Marcela Abbado Neres 2, Deise Dalazen Castagnara

Please download to get full document.

View again

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Science & Technology

Publish on:

Views: 46 | Pages: 8

Extension: PDF | Download: 0

Revista Brasileira de Zootecnia 2010 Sociedade Brasileira de Zootecnia ISSN Production of alfalfa hay under different drying methods 1 Marcela Abbado Neres 2, Deise Dalazen Castagnara 3, Eduardo Eustáquio Mesquita 2, Maximilliane Alavarze Zambom 2, Leiliane Cristine de Souza 4, Paulo Sérgio Rabello de Oliveira 2, Clóves Cabreira Jobim 5 1 Projeto financiado pela Universidade Estadual do Oeste do Paraná - Unioeste. 2 Centro de Ciências Agrárias, Unioeste PR. Rua Pernambuco, 1777, Centro, Marechal Cândido Rondon, PR, CEP: Doutoranda em Produção Vegetal Unioeste PR. 4 Mestranda em Produção e Nutrição Animal Unioeste PR. 5 Universidade Estadual de Maringá UEM. Av. Colombo, 1790, Jd. Universitário. Maringá, PR, CEP: ABSTRACT - This trial aimed at determining the dehydration curve at nine times (0, 3, 6, 9, 24, 27, 30, 33 and 46 hours after cuting of the plants); the leaf/stem ratio and number of leaves per stem in alfalfa submitted to four managements during the drying process. It was also evaluated the bromatologic composition and in vitro digestibility of the dry matter and cell wall of alfalfa hay before storage. The drying methods applied for alfalfa were the following: drying in the field until 50% DM and drying conclusion in an airy shed; drying in the field without turning; drying with only one turning and drying with two turnings. The experimental design was completely randomized with four drying methods and five replications. Leaf dehydration was faster when compared to the stems in all drying methods. Drying in the shed promoted the lesser re-hydration of the plants at night due to dew. It was also verified that alfalfa hays that remained under the sun and were turned showed the worst quality with reduction in crude protein contents and increase in NDF, ADF, NDIN and ADIN. However, in vitro dry matter digestibility and cell wall digestibility did not suffer any alteration because of the different dehydration methods (69.79 and 41.39%, respectively). There is a market fall of leaves and a reduction on the number of leaves per stem with the turnings. Key Words: drying in field, haymaking, in vitro digestibility Produção de feno de alfafa sob diferentes métodos de desidratação RESUMO - Os objetivos do trabalho foram estimar a curva de desidratação em nove tempos (0, 3, 6, 9, 24, 27, 30, 33 e 46 horas após o corte), a relação folha/haste, número de folhas por haste de alfafa submetida a quatro manejos no processo de secagem. Também foram avaliadas a composição bromatológica e digestibilidade in vitro da matéria seca e parede celular do feno antes do armazenamento. Os métodos de secagem da alfafa foram: secagem a campo até 50% de MS e término da secagem em galpão arejado, secagem a campo sem nenhuma viragem; secagem com apenas uma viragem; secagem com duas viragens. O delineamento experimental foi inteiramente casualizado com quatro métodos de secagem e cinco repetições. A desidratação das folhas foi mais rápida em relação às hastes em todos os métodos de secagem. A secagem em galpão promoveu menor reidratação das plantas no período noturno, promovido pelo orvalho. Verificou-se que os fenos de plantas de alfafa que permaneceram ao sol e receberam as viragens apresentaram pior qualidade com redução nos teores de proteína bruta, aumento do FDN, FDA, NIDN e NIDA entretanto a digestibilidade in vitro da matéria seca e da parede celular não sofreram alteração com os diferentes métodos de desidratação (69,79 e 41,39%, respectivamente). Há acentuada queda de folhas e redução no número de folhas por haste com as viragens. Palavras-chave: fenação, digestibilidade in vitro, secagem campo Introduction In Brazil, alfalfa is produced and traded mainly as hay and Crioula is the main cultivar used (Favero et al., 2008), its entire drying process is done under the sun. However, since it is a leguminous, an excessive drying under the sun might occur and the turnings are likely to cause fall of the leaves, consequently, decreasing its nutritional value. Nascimento et al. (2000) found that there was a decrease on hays quality when they remained under the sun, mainly in terms of crude protein, neutral detergent fiber, and acid detergent fiber. Apart from climatic factors and management, several factors which are intrinsic to a Received August 25, 2009 and accepted November 18, Corresponding author: Neres et al forage plant such as cuticle thickness, diameter and length of stem, as well as leaf/stem ratio, among others, interfere on the drying process. The drying curve of forage plants has a typical exponential form, so that each additional unit of water loss requires more time. Although water loss in stable environmental conditions shows a uniform pattern, the drying period can be conveniently divided into three phases, which differ in duration, rate of water loss and resistance for drying (McDonald & Clark, 1987). The first stage of drying is fast and it involves intense loss of water. At this stage, the stomata remain open and there is a high vapor pressure deficit between forage and air, while water loss may reach 1 g/g DM/hour. In the second phase of drying, after stomata closing, water loss occurs throughout cuticle evaporation. Thus, the structure of the leaves, plant cuticle characteristics and structure affect the duration of such drying phase. At the end of drying phase, i.e., the third phase, due to plasmolysis, the cell membrane loses its selective permeability consequently, a fast loss of water occurs. This phase begins when the plant moisture reaches nearly 45%. The third phase is less influenced by the management and more sensitive to climatic conditions than the previous phases, especially in relation to relative humidity (Moser, 1995). Thus, in the production system of alfalfa hay, management has a primordial importance to ensure the quality of the preserved forage. As the number of turnings interferes in the early stages of drying hay, this trial aimed at evaluating the influence of different managements on drying under the sun to produce alfalfa hay, which is evaluated according to leaf/stem ratio, increase of dry matter, bromatologic analysis and in vitro digestibility to determine the most appropriate method of alfalfa haymaking. Material and Methods The experiment was carried out under field conditions on Antônio Carlos dos Santos Pessoa Experimental Farm, which belongs to the Universidade Estadual do Oeste do Paraná, campus of Marechal Cândido Rondon, whose geographic coordinates are the following: latitude S, longitude W and altitude of 420 m. The local weather is classified according to Koppen as Cfa, subtropical with uniform rainfall distribution throughout the year and hot summers. The average temperatures of the coldest quarter vary from 17 to 18 C, while the warmest ones vary from 28 and 29 C and annual average temperature varies from 22 to 23 C. The total annual rainfall means for the region ranges from 1,600 to 1,800 mm. And the most humid quarter showed responses ranging from mm (IAPAR, 2006). During alfalfa drying, the climatic conditions were suitable (Table 1). The experimental area is classified as an Eutroferric Red Latosol with the following chemical characteristics: ph in water = 5.34, P (Mehlich) = mg/dm 3 ; K (Mehlich) = 0.17 cmolc/dm 3 ; Ca 2+ (KCl 1 mol L -1 ) = 4.64 cmolc/dm 3 ; Mg 2+ (KCl mol/l -1 ) = 2.16 cmolc/dm 3 ; Al 3+ (KCl 1 mol/l) = 0.00 cmol c /dm 3 ; H + Al (calcium acetate 0.5mol/L) = 4.96 cmolc/dm 3 ; SB = 6.99 cmolc/dm 3 ; CTC= cmolc/dm 3 ; V=58.49%; organic matter (Boyocus Method) = g/dm 3 and clay = 65%. The experiment was set in a 1.2-ha area, using the following methods for drying alfalfa: drying under field up to 50% dry matter and the last part of drying was done in airy shed; the second method was drying without turning, followed by a drying with just one turning and drying with two turnings. In order to determine the drying curve, leaf/stem ratio and number of leaves per stem, samples were collected at 0 (time of cut), 3, 6, 9, 24, 27, 30, 33 and 46 hours after cut, based on a completely randomized and 4 9 factorial design (four drying methods and ten times of collection after the cut) with five replications. For the chemical-bromatologic composition, the experimental design was completely randomized with four drying methods and three periods of evaluation (before cutting, before haymaking and after 60 days of storage). A completely randomized design was carried out with four drying methods and five replications for both in vitro dry matter and cell wall digestibility. The plants from the experimental area were cut at 9:00 a.m., on January 8 th, It was used a mower at 5 cm from Table 1 - Climatic data for the periods of cut and drying of alfalfa plants Date Temperature ( o C) Relative humidity (%) Dew point temperature ( o C) Radiation Rainfall mean maximum minimum mean maximum minimum mean maximum minimum (KJ/m 2 ) (mm) 01/08 th / , /09 th / , /10 th / , 1678 Production of alfalfa hay under different drying methods the soil. The production of alfalfa hay showed almost 30% of flowering. During the drying method without turning, the material was cut and spread out on the field for drying, without any turning over the haymaking period. The material was cut and submitted to one turning six hours after it was spread on the field for drying. The second management had two turnings, the first one at six hours and the second at 24 hours after the material was cut and spread on the field for drying. The material was cut and spread on field until it reached 50% moisture for drying treatment in shed. Then, it was collected and transferred to an airy shed and spread to finish its drying in a covered space. Two samples of alfalfa were taken from the field to determine the ideal dry matter and carried to a shed to be complete dried. The first sample was placed in a forced air circulation oven at 55 o C for 72 hours and the second was used for fast determination of dry matter by the Microwave method, described by Ruggiero et al. (2002). The sample collections were taken at 0 (at cut), 3, 6, 9, 24, 27, 30, 33 and 46 hours after cutting to determine the drying curves according to different drying methods. The samples were packed in paper bags, weighed, placed in an oven with forced ventilation and maintained at 55 C for 72 hours. After 46 hours of drying, the alfalfa was mechanically baled in rectangular bales with an average weight of 12 kg. The bales were stored under identical conditions of temperature, light and moisture, in a shed for protection against rain and sun light. The determination of leaf/stem ratio was done with 50-gram samples by the drying method at 0, 3, 6, 9, 24, 27, 30, 33 and 46 hours after cutting. After the collection of the material, leaves were separated from stems. Their samples were put in paper bags and dried at 55 C for 72 hours in a drying oven with forced ventilation. The leaf/stem (L/S) ratio was obtained through the ratio between dry weight of leaves and dry weight of stems for all drying times in the four drying methods. In order to determine the number of leaves per stem, leaves from ten stems were counted per plot. And to determine the chemicalbromatologic composition, samples of alfalfa were collected at the cutting time, before baling and after 60 days of storage. The dried samples were ground in Willey mill, with 30-mesh sieve, and stored in properly identified plastic bags, to evaluate dry matter (DM) and crude protein (CP) according to AOAC (1990), neutral detergent fiber (NDF), acid detergent fiber (ADF) according to Van Soest et al. (1991) and neutral detergent insoluble nitrogen (NDIN), acid detergent insoluble nitrogen (ADIN), ether extract (EE), lignin and cellulose according to Silva & Queiroz (2006). For determination of in vitro digestibility of DM (IVDDM) and in vitro digestibility of cell wall (IVDCW), samples of hay were collected before baling. The technique described by Tilley & Terry (1963) was adopted and adapted to an Artificial Rumen, as described by Holden (1999). For the collection of ruminal fluid, a B & W Holstein multiparous cow was used. The animal was not under lactation, had an average weigh of 550 kg and a rumen cannula. It was confined in a tie-stall system, with rubber floor, let free in intervals of feeding in a shaded area for exercises, and it was fed diet with roughage and concentrate. Three samples were obtained from rumen fluid at intervals of one week. A 0.25-g sample was weighed for each food, in triplicate, ground in a 1-mm sieve, put in F57 filters and packed in jars containing rumen fluid, obtained via ruminal cannula and a buffer. The material was incubated for 48 hours and at the end of this period, a solution of HCl- Pepsin (1:10,000) was added into an artificial fermenter at a ml rate/sample, so the remaining material was kept under incubation for more 24 hours. When this phase finished, the filters were removed from the ruminal fermenter. They were washed with distilled water until a complete withdrawal of materials that were adhering to filters. Finally, they were dried in a forced air circulation oven for 8 hours at 105 o C to determine the analytic dry matter. The in vitro digestibility of DM was calculated by the difference between the incubated material and the residue after incubation: IVDDM = (DM from the initial food DM from residual food)/ DM from the initial food * 100 A methodology described by Goering & Van Soest (1975) was adopted to determine the IVDCW, requiring half of the time of the technique described by Tilley and Terry (1963). In this method, the digestion with pepsin and hydrochloric acid was abolished since the residue from the fermentation phase would be extracted with detergent. The in vitro digestibility of the cell wall was calculated by the difference between the amount of incubated NDF and the residue that remained after the determination of NDF incubated material: IVDCW = (NDF from the initial food - NDF of residual food) / NDF from the initial food * 100. Data were statistically analyzed according to SAEG (UFV, 1997). The averages of bromatologic composition and in vitro digestibility of DM and cell wall, leaf/stem ratio and number of leaves per tiller were compared by Tukey test at 5% probability. The data on dry matter content of the whole Neres et al plant, leaf and stem were obtained by regression analysis using SAEG program (UFV, 1997). Results and Discussion The moisture content decreased after the cut with a slight increase in the early mornings as well as with its results, so there was an adjustment to the quadratic regression model (Table 2). Andrade et al. (2006) also observed a decline in the DM contents in the early morning, when it was examined three cultivars of alfalfa versus drying time. The authors obtained average values of 83.4% DM in 73 hours of drying. On the other hand, at the 9:00 a.m. collection, the observed increase in moisture was due to the accumulated dew at night. According to Rotz (1995), hay is hygroscopic, i.e., it can absorb or lose water to the environment, allowing relative humidity (RH) to influence on moisture content of a material exposed to the environment. So, the drying methods without turnings and with one and two turnings, when exposed to the environment, absorbed water at night and in the early morning, while the material dried in field up to 50% DM and later taken to the shaded place lost less moisture as well as showed lower water absorption since it was protected. This contributed to the approximation of drying methods. The last collection during the drying process was carried out at 8:30 a.m. Hay was baled at 9:30, so, the collection at time 46 showed higher moisture content (Figure 1). The interaction was significant between the drying methods and collection time concerning DM content after the cut. At times 0, 3, 6 and 9, drying rates were close, even in the method that received only one turning. Twenty-four hours after cutting, the drying methods began to differ from each other. The method without turning showed the lowest DM content when compared to the one turning method, maybe because this last one was more uniformly exposed to the sun, so it got dried faster while the first one remained in the pile with less surface exposed to solar radiation. Twenty-seven hours after cutting, the drying in the field up to 50% DM and dried under the shade began to reduce the DM value because the material did not have any solar radiation, which, according to Harris & Tullberg (1980), has been identified as the main environmental factor that influences the drying of grass and leguminous. Concerning the moisture losses, it was found that, except for drying in shed, the final values were very close, however, for leguminous, the drying rate for leaves was much faster than for stems. Thus, the drying method choice should consider the loss of leaves according to the turnings. Dry matter (%) Drying time (h) Figure 1 - Total dry matter contents in alfalfa, dried in a shed ( ) without turning ( ), a single turning ( ) and two turnings ( ) according to drying time. Table 2 - Evaluations of dry matter contents of the whole plant, leaves and stems of alfalfa under different drying methods according to the collection time Total dry matter (%) Equation r 2 CV % Shed x x No turning x x turning x x turnings x x Dry matter of leaf (%) x x Dry matter of stem (%) Shed x x No turning x x turning x x turnings x x Leaf/stem ratio Ns Number of leaves/stem Ns Ns: nonsignificant; CV: coefficient of variation. 1680 Production of alfalfa hay under different drying methods The DM percentages of alfalfa leaves did not undergo interaction of drying methods over time, while the averages were adjusted to the quadratic regression model (Table 2). The moisture loss in the leaves was faster than in the stems, according to all studied times. The moisture increase was also observed in the early hours of the day (Figure 2). The DM contents were also adjusted to the quadratic regression model, when the moisture loss in stems was taken into account and, in the early morning, there was always an increase in moisture content depending on dew. There was a significant interaction among drying methods and times (Figure 3). Factors such as stem diameter and thickness of the cuticle obstruct water loss of stems when compared to leaves. The leaf/stem (L/S) ratio is strongly influenced by the drying methods, and a low ratio will reflect negatively on the forage nutritional value (Costa et al. 2006). It can be observed that L/S ratio (Table 3) was constant until the implementation of the first turnings. After the turnings (6 and 9 times), the drying methods began to interfere in the L/S ratio. This can be observed by comparing the means over time when the drying method in field was until 50% DM and a subsequent drying at shade; and the method without turnings showed some variations (p 0.05) in times as, for example, 0 (1.086) and 33 (0.938). However, the dryings with one or two turnings showed some effective decreases. The records for one turning ranged from at time 0 to at time 45. However, with two turnings and an Dry matter of leaves (%) Drying time (h) Figura 2 - Effect of drying time on dry matter contents of alfalfa leaves according to methods of dehydration. L/S ratio, this answer increased from at time 0 to at time 45. The obtained values of L/S ratio in this experiment were lower than those ones obtained by Costa et al. (2006), due to the season and also because crioula alfalfa has shown some decrease of L/S ratio as days get hotter, which explains the lower L/S ratio. Viana et al. (2004) evaluated the L/S ratios of 28 alfalfa cultivars and the crioula cultivar was always part of the group with a lower ratio between L/S (nearly 1.05) in all periods when this relationship was studied. Nascimento et al. (20
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks