P5BV3+/e. Rev. C+ System Board Carte Mère Manuel System-Platine User s Manual Pour Utilisateur Benutzerhandbuch - PDF

Description
P5BV3+/e Rev. C+ System Board Carte Mère Manuel System-Platine User s Manual Pour Utilisateur Benutzerhandbuch Copyright This publication contains information that is protected by copyright. No

Please download to get full document.

View again

of 29
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Beauty

Publish on:

Views: 20 | Pages: 29

Extension: PDF | Download: 0

Share
Transcript
P5BV3+/e Rev. C+ System Board Carte Mère Manuel System-Platine User s Manual Pour Utilisateur Benutzerhandbuch Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/ adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. The user will assume the entire risk of the use or the results of the use of this document. Further, the manufacturer reserves the right to revise this publication and make changes to its contents at any time, without obligation to notify any person or entity of such revisions or changes All Rights Reserved. Trademarks Microsoft MS-DOS, Windows TM, Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Cyrix, 6x86, 6x86L,6x86MX and M II are registered trademarks of Cyrix Corporation. AMD, K5, K6, K6-2 and K6-III are registered trademarks of Advanced Micro Devices, Inc. IBM is a registered trademark of International Business Machine Corporation. IDT C6, WinChip2 and WinChip3 are registered trademarks of IDT Corperation. Award is a registered trademark of Award Software, Inc. Other trademarks and registered trademarks of products appearing in this manual are the properties of their respective holders. Caution: Danger of explosion if battery incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the battery manufacturer s instructions. FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. Notice: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables must be used in order to comply with the emission limits. Table of Contents / Sommaire / Inhaltsverzeichnis Chapter 1 - Introduction 1.1 Features and Specifications Package Checklist... Chapter 2 - Hardware Installation 2.1 System Board Layout DIP Switch and Jumper Settings of the Processors Jumper Settings for Clearing CMOS Data Jumper Settings for SDRAM Clock (DIMM) Connectors... Chapter 3 - Award BIOS Setup Utility 3.1 Entering the Award BIOS Setup Utility Setting the Date and Time Selecting the Hard Drive and Floppy Drive Type Selecting the Drive to be Searched First for an Operating System Loading Fail-Safe Settings/Optimal Settings Setting the Supervisor/User Password... Chapter 4 - Supported Softwares 4.1 Drivers Appendix A - System Error Messages A.1 POST Beep... A.2 Error Messages Note: The user s manual in the provided CD contains detailed information about the system board. If, in some cases, some information doesn t match those shown in this manual, this manual should always be regarded as the most updated version. To view the user s manual, insert the CD into a CD-ROM drive. The autorun screen (Main Board Utility CD) will appear. Click User s Manual. Chapter 1 - Introduction / Introduction / Einleitung 1.1 Features and Specifications Caractéristiques et Spécifications Leistungsmerkmale und Technische Daten Features / Caractéristiques / Leistungsmerkmale Chipset VIA Apollo 598MVP AGP system chipset Processor The system board is equipped with a 321-pin ZIF (Super Socket 7). It is also equipped with a switching voltage regulator that automatically detects 2.V to 3.5V. AMD K5 PR9/PR1/PR12/PR133/PR166, K6-166/2/233/ 266/3, K6-2/25/266/3/333/35/366/38/4/45 or K6-III/4 Intel Pentium 9/1/12/133/15/166/2MHz or Intel Pentium processor with MMX TM technology-166/2/233mhz Cyrix 6x86L PR15+/PR166+/PR2+, 6x86MX-PR166/ PR2/PR233/PR266 or M II-2/266/3/333/366/38/4 IBM 6x86MX-PR2/PR233/PR266/PR3/PR333 IDT C6-18/2/225/24, WinChip2-2/225/233/24/266/ 3 or future WinChip3 series System Memory 16MB to 256MB memory using unbuffered DIMMs Uses PC-1 SDRAM for 1MHz external system bus clock processors Two 168-pin DIMM sockets using x64 SDRAM, 3.3V DIMMs 2MBx64 4MBx64 Memory Size 16MB 32MB DIMMs 8MBx64 16MBx64 Memory Size 64MB 128MB Level 2 Cache Memory 512KB or 1MB pipeline burst, direct map write-through cache installed on the system board. Expansion Slots The system board is equipped with 1 dedicated AGP slot, 2 dedicated PCI slots, 1 dedicated 16-bit ISA slot and 1 shared PCI/ ISA slot. All PCI and ISA slots are bus masters. 4 Introduction 1 Desktop Management Interface (DMI) The system board comes with a DMI 2. built into the BIOS. The DMI utility in the BIOS automatically records various information about your system configuration and stores these information in the DMI pool, which is a part of the system board's Plug and Play BIOS. DMI, along with the appropriately networked software, is designed to make inventory, maintenance and troubleshooting of computer systems easier. Connectors 2 connectors for external USB ports 1 connector for IrDA interface 2 serial ports 1 parallel port 2 IDE connectors 1 floppy connector 1 PS/2 mouse port 1 PS/2 or AT keyboard port 1 12-pin standard AT power supply connector 1 fan connector for CPU fan PCI Bus Master IDE Controller Two PCI IDE interfaces support up to four IDE devices Ultra DMA/33 supported (Synchronous Ultra DMA mode - data transfer rate up to a maximum of 33MB/sec.) PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.) Bus mastering reduces CPU utilization during disk transfer ATAPI CD-ROM, LS-12, ZIP supported and SCSI sequential boot-up. IrDA Interface The system board is equipped with an IrDA connector for wireless connectivity between your computer and peripheral devices. It supports peripheral devices that meet the IrDA or ASKIR standard. USB Ports The system board is equipped with two connectors for external USB ports. USB allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. BIOS Award BIOS, Windows 95/98 Plug and Play compatible Flash EPROM for easy BIOS upgrades 1MB flash memory (2MB - optional, includes SDMS function) 5 1 Introduction Intelligence / Intelligence / Intelligente Ausstattungsteile Virus Protection Most viruses today destroy data stored in hard drives. The system board is designed to protect the boot sector and partition table of your hard disk drive. 1.2 Package Checklist Liste de Vérification de l Emballage Verpackungsliste The system board package contains the following items: þ þ þ þ þ þ The system board A user s manual Serial, mouse and printer port cables Option 1: - One card-edge bracket with a 9-pin and 25-pin serial port cables - One card-edge bracket with a 25-pin printer port cable and a PS/2 mouse port cable Option 2: - One card-edge bracket with two 9-pin serial port cables and a PS/2 mouse port cable - One 25-pin printer port cable for chassis mounting One 4-pin IDE hard disk cable One 34-pin floppy disk drive cable One CD One card-edge bracket with two USB ports (optional) If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. 6 Chapter 2 - Hardware Installation Installation du Matériel Installation der Hardware 2.1 System Board Layout Position de la Carte Système Aufbau der Hauptplatine Mounting hole used for installing a mounting screw to secure the system board to the chassis. Warning: Remember to remove the mounting screw located underneath the processor prior to removing the system board from the chassis. To access the mounting screw, you must first loosen the fan/heatsink and remove the processor. 7 2 Hardware Installation 2.2 DIP Switch and Jumper Settings of the Processors Positionnement des Cavaliers sur le Processeurs DIP Schaltereinstellungen für den Prozessor In the example above: Switch 1: Off Switch 6: Off Switch 2: On Switch 7: Off Switch 3: On Switch 8: Off Switch 4: On Switch 9: Off Switch 5: On Switch 1: On DIP Switch Settings for Intel Processors Intel Processors SW1: 1-6 9MHz - 6MHz - 1.5x Intel Processors SW1: MHz - 66MHz - 2.5x 1MHz - 66MHz - 1.5x 2MHz - 66MHz - 3x 12MHz - 6MHz - 2x MMX166MHz* - 66MHz - 2.5x 133MHz - 66MHz - 2x MMX2MHz - 66MHz - 3x 15MHz - 6MHz - 2.5x MMX233MHz - 66MHz - 3.5x * Default 8 Hardware Installation 2 DIP Switch Settings for AMD Processors AMD Processors SW1: 1-6 AMD Processors SW1: 1-6 K5 PR9-6MHz - 1.5x K6-2/266-66MHz - 4x K5 PR1-66MHz - 1.5x K6-2/3-66MHz - 4.5x K5 PR12-6MHz - 2x K6-2/3-1MHz - 3x K5 PR133-66MHz - 2x K6-2/333-66MHz - 5x K5 PR166-66MHz - 2.5x K6-2/333-95MHz - 3.5x K MHz - 2.5x K6-2/35-1MHz - 3.5x K MHz - 3x K6-2/366-66MHz - 5.5x K MHz - 3.5x K6-2/38-95MHz - 4x K MHz - 4x K6-2/4-1MHz - 4x K MHz - 4.5x K6-2/45-1MHz - 4.5x K6-2/25-1MHz - 2.5x K6-III/4-1MHz - 4x 9 2 Hardware Installation DIP Switch Settings for Cyrix Processors Cyrix Processors SW1: 1-6 Cyrix Processors SW1: 1-6 6x86L PR MHz - 2x M II-3-66MHz - 3.5x 6x86L PR MHz - 2x M II-3-75MHz - 3x 6x86L PR MHz - 2x M II MHz - 4x 6x86MX-PR166-6MHz - 2.5x M II MHz - 3.5x 6x86MX-PR2-66MHz - 2.5x M II MHz - 3x 6x86MX-PR233-75MHz - 2.5x M II MHz - 3.5x 6x86MX-PR266-83MHz - 2.5x M II-366-1MHz - 2.5x M II-2-66MHz - 2.5x M II-38-1MHz - 3x M II MHz - 3x M II-4-95MHz - 3.5x DIP Switch Settings for IBM Processors IBM Processors SW1: 1-6 IBM Processors SW1: 1-6 6x86MX-PR2-66MHz - 2.5x 6x86MX-PR3-66MHz - 3.5x 6x86MX-PR233-75MHz - 2.5x 6x86MX-PR3-75MHz - 3x 6x86MX-PR266-83MHz - 2.5x 6x86MX-PR333-83MHz - 3x 1 Hardware Installation 2 DIP Switch Settings for IDT Processors IDT Processors SW1: 1-6 IDT Processors SW1: 1-6 C MHz - 3x WinChip MHz - 3x C MHz - 3x WinChip MHz - 3.5x C MHz - 3x WinChipP MHz - 4x C MHz - 4x WinChip MHz x WinChip MHz - 3x WinChip MHz - 2.5x External System Bus Clock / Frequency Ratio - DIP Switch Settings If the processor you are using is not included in the previous tables, please refer to the tables below and set SW1 according to the external system bus clock and frequency ratio of your processor. Frequency Ratio Settings for AMD, Cryix, Intel and IBM Processors Frequency Ratio SW1: 4-6 Frequency Ratio SW1: x / 3.5x 4x 2x 4.5x 2.5x 5x 3x 5.5x 11 2 Hardware Installation Frequency Ratio Settings for IDT Processors Frequency Ratio SW1: 4-6 Frequency Ratio SW1: x 4x 2x/3.3x 4.5x 2.5x 2.33x/5x 3x 2.66x/5.5x External System Bus Clock Settings External System Bus Clock SW1: 1-3 External System Bus Clock SW1: 1-3 6MHz 83MHz 66MHz 95MHz 75MHz 1MHz Warning/Attention/Warnung: We do not guarantee that 75MHz, 83MHz, 95MHz and 1MHz external system bus clock processors will work with all types of add-in cards, memory modules or other devices. Nous ne garantissons pas que les processeurs d horloge de bus système externes de 75MHz, 83MHz, 95MHz et 1MHz fonctionneront avec tous les types de cartes ajoutées, les modules ou autres matériels. Wir garantieren nicht, daß Prozessoren mit externem Systembustakt von 75, 83, 95 und 1 MHz mit allen Zusatzkarten, Modulen oder anderen Geräten arbeiten. 12 Hardware Installation 2 DIP Switch and Jumper Settings for Core Voltage Voltage JP3 SW1: 7-1 Voltage JP3 SW1: V 2.8V* 2.1V 2.9V 2.2V 3.V 2.3V 3.1V 2.4V 3.2V 2.5V 3.3V 2.6V 3.4V 2.7V 3.5V * Default 13 2 Hardware Installation 2.3 Jumper Settings for Clearing CMOS Data Positionnement des Cavaliers pour Effacer les Données CMOS Jumpereinstellungen zum Löschen der CMOS Daten Jumper JP1 - Clear CMOS Data To load the default values stored in the ROM BIOS, power off your system. Set JP1 pins 1 and 2 to On. Wait for a few seconds and set JP1 back to its default setting, pins 2 and 3 On. You may now power-on your system. 1-2 On: Clear CMOS Data 2-3 On: Normal (default) 14 Hardware Installation Jumper Settings for SDRAM Clock (DIMM) Positionnement des Cavaliers d Horloge SDRAM (DIMM) Brückeneinstellungen für SDRAM-Takt (DIMM) Jumper JP2 - SDRAM Clock JP2 is used to set the SDRAM s clock according to the CPU clock or AGP clock. If you are using PC SDRAM DIMMs, it is recommended that you set the SDRAM clock according to the CPU clock (2-3 On). This setting will provide better system performance specially when used with 75/83/95/ 1MHz processors. However, if you encounter compatibility problems with PC-1 SDRAM DIMMs or you are using EDO/PC-66 SDRAM DIMMs, set the SDRAM clock according to the AGP clock (1-2 On) On: SDRAM CLK = AGP CLK (default) 2-3 On: SDRAM CLK = CPU CLK CPU CLK SDRAM CLK 6MHz 6MHz 66MHz 66MHz 75MHz 6MHz 83MHz 66MHz 95MHz 66MHz 1MHz 66MHz AGP CLK 6MHz 66MHz 6MHz 66MHz 66MHz 66MHz CPU CLK 6MHz 66MHz 75MHz 83MHz 95MHz 1MHz SDRAM CLK 6MHz 66MHz 75MHz 83MHz 95MHz 1MHz AGP CLK 6MHz 66MHz 6MHz 66MHz 66MHz 66MHz 15 2 Hardware Installation 2.5 Connectors / Connecteurs / Anschlüsse Serial Ports / Parallel Port Ports Série / Port Parallèle Serielle Anschlüsse / Paralleler Anschluß PS/2 Mouse Port Ports Souris PS/2 PS/2-Maus-Anschluß Pin Function Mouse Data Reserved Ground +5V Mouse Clock Reserved 16 Hardware Installation Floppy Disk Drive Controller and IDE Interface Contrôleur de Lecteur de Disquette et Interface IDE Diskettenlaufwerkcontroller und IDE Interface Important: If you encountered problems while using an ATAPI CD-ROM drive that is set in Master mode, please set the CD-ROM drive to Slave mode. Some ATAPI CD-ROMs may not be recognized and cannot be used if incorrectly set in Master mode Universal Serial Bus Ports Ports de Bus Série Universels Universelle Serielle Bus-Anschlüsse Pin J2 +5V -Data +Data Ground Ground J3 +5V -Data +Data Ground Key 17 2 Hardware Installation LEDs and Switches Commutateurs et LED LEDs und Schalter HD-LED (Primary/Secondary IDE LED) G-LED (Green LED) G-SW (Green switch) H-RST (Reset switch) SPEAKER (Speaker connector) KEYLOCK (Keylock and Power LED connector) Use pins 18 to 2 for the Power LED. Pin Pin Assignment HDD HDD LED Power N. C. Green LED Power Green N. C. SMI Ground N. C. H/W Reset Ground N. C. Speaker Power Ground N. C. Speaker N. C. LED Power N.C. Ground Keylock Ground 18 Hardware Installation IrDA Connector Connecteur IrDA IrDA Anschlüsse Pin Function IRTX GND IRRX IRR3 VCC CPU Fan Connector Connecteur du Ventilateur de CPU CPU Kühlung Anschluß Pin Function GND +12V GND 19 Chapter 3 - Award BIOS Setup Utility Utilitaire de Configuration du Award BIOS AWARD BIOS Konfigurationsprogramm 3.1 Entering the Award BIOS Setup Utility Entrer Dans l Utilitaire de Configuration du Award BIOS Aufruf des AWARD BIOS Konfigurationsprogramms Power-on the system and press Del to enter the utility. The main program screen will appear. Allumez le Système et appuyez sur Del pour entrer dans l utilitaire. L écran du programme principal apparaîtra. Zum Aufrufen des Konfigurationsprogramms drücken Sie während des Startvorgangs die Taste Del . Ein Bildschirm ähnlich dem folgenden erscheint. ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION LOAD FAIL-SAFE SETTINGS LOAD OPTIMAL SETTINGS INTEGRATED PERIPHERALS SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECTION SAVE & EXIT SETUP EXIT WITHOUT SAVING Esc F1 : Quit : Save & Exit Setup (Shift) F2 : Select Item : Change Color 2 Award BIOS Setup Utility Setting the Date and Time Paramétrage de la Date et de l Heure Einstellen des Datums und der Zeit ROM PCI/ISA BIOS STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm:dd:yy) : Thu, Jan Time (hh:mm:ss) : 2 : 1 : 28 HARD DISKS Primary Master Primary Slave Secondary Master Secondary Slave : : : : TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Drive A : 1.44M, 3.5 in. Drive B : None Video : EGA/VGA Halt on : All Errors Esc F1 : Quit : Help : Select Item (Shift)F2 : Change Color Base Memory : 64K Extended Memory : 1348K Other Memory : 384K Total Memory : 13172K PU/PD/+/- : Modify 1. Select Standard CMOS Setup in the main program screen and press Enter . Sélectionnez Standard CMOS Setup dans l écran du programme principal et appuyez sur Entrée . Standard CMOS Setup in dem Hauptbildschirm auswählen, und die Eingabetaste (Enter) drücken. 2. Set the correct date and time in the Date and Time fields respectively. Sélectionnez la date et l heure correcte dans les champs Date et Time respectivement. Jeweils korrekte Werte in die Eingabefelder Date (Datum) und Time (Zeit) eingeben. 21 3 Award BIOS Setup Utility 3.3 Selecting the Hard Drive and Floppy Drive Type Sélectionnez le Type de Disque Dur et de Lecteur de Disquette Auswahl der Festplatte und des Diskettenlaufwerks Date (mm:dd:yy) : Thu, Jan Time (hh:mm:ss) : 2 : 1 : 28 HARD DISKS Primary Master Primary Slave Secondary Master Secondary Slave Drive A : 1.44M, 3.5 in. Drive B : None Video : EGA/VGA Halt on : All Errors Esc F1 : Quit : Help : : : : TYPE SIZE ROM PCI/ISA BIOS STANDARD CMOS SETUP AWARD SOFTWARE, INC. CYLS HEAD PRECOMP : Select Item (Shift)F2 : Change Color LANDZ SECTOR MODE Base Memory : 64K Extended Memory : 1348K Other Memory : 384K Total Memory : 13172K PU/PD/+/- : Modify Select Standard CMOS Setup in the main program screen and press Enter . Sélectionnez Standard CMOS Setup dans l écran du programme principal et appuyez sur Entrée . Standard CMOS Setup in dem Hauptbildschirm auswählen, und die Eingabetaste (Enter) drücken. 2. Select for the hard disk drive(s) installed in your system. The BIOS will auto-detect the HDD & CD-ROM drive at the POST stage and show the IDE for the HDD & CD-ROM drive. If a hard disk has not been installed, select None and press Enter . Sélectionnez pour le(s) disque(s) dur(s) installés dans votre système. Le BIOS détectera automatiquement le Disque Dur et le Lecteur CD-ROM durant la phase POST et affichera l IDE du Disque Dur et du Lecteur CD-ROM. Si aucun disque dur n a été installé, sélectionnez None et appuyez sur entrée . Im Eintrag Hard Disk Drive(s) (Festplatte) auswählen. Das Programm entdeckt die Festplatte sowie das CD-ROM Laufwerk während der Initialisierung automatisch. Ist keine Festplatte installiert, aktivieren Sie den Eintrag None. Eingabetaste (Enter) drücken. Award BIOS Setup Utility 3 3. Set the type of floppy drive installed in the Drive A and Drive B fields. The options are None, 36K, 1.2M, 72K, 1.44M and 2.88M. Paramétrez le type de lecteur de disquette installé dans les champs Drive A et Drive B. Les options sont None, 36K, 1.2M, 72K, 1.44M et 2.88M. Im Eintrag Floppy Drive (Diskettenlaufwerk) wählen Sie Drive A (Laufwer k A) und Drive B (Laufwerk B). Die Optionen sind None (Kein), 36K, 1.2M, 72K, 1.44M und 2.88M. 3.4 Selecting the Drive to be Searched First for an Operating System Sélectionner le Lecteur qui doit être Détecté en premier par u
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks