Hi everyone, my name is Michał Iwanicki. I m an engine programmer at Naughty Dog and this talk is entitled: Lighting technology of The Last of Us, - PDF

Hi everyone, my name is Michał Iwanicki. I m an engine programmer at Naughty Dog and this talk is entitled: Lighting technology of The Last of Us, but I should have called it old lightmaps new tricks 1

Please download to get full document.

View again

of 40
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Fan Fiction

Publish on:

Views: 28 | Pages: 40

Extension: PDF | Download: 0

Hi everyone, my name is Michał Iwanicki. I m an engine programmer at Naughty Dog and this talk is entitled: Lighting technology of The Last of Us, but I should have called it old lightmaps new tricks 1 The Last Of Us is an action-adventure, survival-horror game, with a heavy emphasis on story and characters. It takes place in the near future, where mankind has been decimated by a mind-controlling fungus. If you haven t seen the game yet, here s a short trailer 2 Since the game takes place in a post-apocalyptic world, there s almost no electricity, so no artificial light sources. The majority of the lighting comes from the sun and the sky, so most of the environments are lit just by bounce lighting. There was a very strong art direction: we wanted to show the beauty of this lighting, its softness, how it interacts with different surfaces, the soft shadows it creates. We wanted to show specular highlights of the indirect illumination and show all those subtle details modeled with normal maps. 3 Just to give you an overview of what we were after, here s some concept art 4 5 As you can see, all the lighting is very soft, but you still get a very clear read of all the surface details. 6 From the very beginning, we knew that to achieve this level of quality, relying purely on runtime lighting would not be enough. We knew that we had to compute our lighting offline, so we decided to use lightmaps. The problem with lightmaps is that even though the game industry has been using them for years now (since Quake 1?), they still suffer from really fundamental issues 7 Like the seams: the discontinuities in the lighting. It can happen that parts of the mesh that are contiguous in 3D space are mapped into disjoint regions in UV space, and the interpolated lighting values along split edges don t quite match, which causes visible seams. While methods to deal with this do exist, they either generate additional cost at runtime or impose restrictions on shape and/or placement of charts in uv space, leading to inefficiencies in the uv space usage, which we wanted to avoid. Seamless atlasing methods can be used but with the size of our levels, they were too costly to integrate into our pipeline. 8 We found a pretty simple, yet effective solution: if the interpolated values on both sides of split edges don t match, let s just make them match, by slightly modifying the intensities of the surrounding texels. 9 Let s take a look at the example: a mesh in 3D space is atlased into 2 disjoint regions in UV space. Along the split edge we create a number of stitching points (we create three points per texel, since the bilinear interpolation follows a quadratic curve). Let s examine one of those stitching points. The value in the stitching point for the chart on the left, Ci0, is the interpolated value of four surrounding texels, marked in blue. Same with the value on the other side of the edge: Ci1. We want Ci0 and Ci1 to be equal. We can define the error for this stitching point as a squared difference between them. And then we define the error function for the whole lightmap, which is the sum of the errors for individual stitching points. 10 Once we have the error function we simply minimize it using least squares, treating texel values as variables. The optimization modifies the texel values slightly and makes sure that the total error is minimized. To make sure that the values don t deviate from the originally calculated ones, we add additional constraints that penalize deviation from the calculated values, with a user-controllable strength. It works surprisingly well: it doesn t require any changes to the UV layout and doesn t generate any additional cost at runtime; it can be easily applied to already existing maps. This isn t limited to lightmaps: the method can be used on other types of maps as well. 11 There are some caveats however. First of all: block compression, which tends to break the stitching a bit. In most cases it still looks ok, but when it doesn t we have an option to re-stitch the compressed texture, this time modifying blocks anchor points instead of individual pixels. The second thing is the linear solver: just don t write your own, it s just a bad idea. There are some pretty good ones available, and if you don t like the hassle of integrating big libraries, there s Eigen which is all template based and comes as a collection of header files. 12 This is one, small off-topic slide, but I just couldn t resist: just add least-squares minimization to your bag of tricks. It s really useful but often overlooked by the game developers community. Once you use it, you suddenly see tons of other applications. On of them is the pipeline for 3D LUTs used for color corrections in games: The workflow usually looks like this: - Take screenshot - Embed identity volume texture in the image - Massage in Photoshop - Extract LUT - Then in game, you render your scene, take the extracted LUT, apply it and you get the same result as in Photoshop Well, the problem is that it s not the same. Due to quantization of various components, you can get pretty serious discolorations. What we do: we minimize the difference between the image from Photoshop and the image in game. The error function is defined as a squared difference between those two images, and we modify the volume texture so that it s minimized. It works much better than just using the straight volume texture. 13 But going back to lighting We wanted to avoid the flat look of our surfaces in the absence of direct lighting, so we knew that we needed some sort of directional information in the lightmaps. We evaluated different options, like the HL2 basis and spherical harmonic lightmaps, but we settled on a very simple representation: a pair of ambient and directional lights stored for every lightmap texel. 14 Why? It has some really nice properties: 1. It s very easy to understand by the artists, which is extremely useful, since they like investigating the outputs from the bake process 2. It can be hand tweaked to some extent 3. And we have the direction of the dominant light, which we can also use to get some additional effects. 15 For each texel of our lightmap, the baking tool generates some distribution of incoming lighting, and we divide is into two components: - Ambient term: which is just a single color, intensity of the uniform lighting arriving from all directions - Directional term: which is a direction vector and a color intensity of lighting arriving from that direction We generate this representation from an SH lightmap generated by our globalillumination bake tool. We do it in a way that minimizes the difference in the final lighting produced by those two representations. 16 With this representation, we can use normal maps to provide high frequency details. The intensity of the diffuse lighting is simply: ambient term + directional color * (n.l) For glossy surfaces we also use that direction to add a specular highlight. 17 And this is all great, but then we add characters 18 19 EEEE, wrong! The character looks as if he was a sticker slapped on top of the screen. 20 We want this! Where character properly interacts with the lighting, is nicely grounded, casts a believable shadow. He actually looks like it s part of the environment, not something added later on. 21 The origianal inspiration came from SH exponentiation papers. They approximate occluders with sets of spheres and combine visibility functions described as SH vectors, by multiplying them together in a fancy way. The problem is that to get long shadows, you need a high SH order. 2nd order SH works fine for AO Stephen Hill did something similar in Splinter Cell Conviction but for shadows it s just not enough. 22 BUT! Our representation of lighting comes to the rescue. It has a very simple structure: it s just an ambient component and a directional component. We don t need to worry about the whole visibility function, we just need to occlude those two parts appropriately. Just like the papers mentioned, we approximate the occluders with spheres. Then, for every point we shade, for each of those occluding spheres: - For the ambient component, we compute the occlusion of the as a cosineweighted percentage of hemisphere occluded by the sphere - For the directional component we trace a cone from a point being shaded, in the direction of the dominant lighting and check for the intersections with the occluder sphere 23 Here s the breakdown of how it works: We have some lighting at a point in space and a occluder and how the occlusion values are calculated for both components 24 This is how it works in practice first without, then with the occlusion calculations. 25 Now some technical details: For the ambient component, there s a closed form solution for the occlusion value: it s just the cosine lobe integrated over the solid angle subtended by the sphere divided the cosine lobe integrated over the entire hemisphere. There is a formula to calculate the occlusion of the directional component as well, but it s rather cumbersome. We ve found that it s much easier to just precompute it using Monte Carlo methods and store it in a texture. For a given cone angle, the occlusion value is a function of the angle subtended by the occluder (theta) and the angle between the cone axis and the vector pointing towards the occluder center (phi). We can store this function in a 2D texture, and for different cone angles we can stack several of them in a 3D texture. 26 The angle of the cone we use for tracing is chosen arbitrarily. It controls the penumbra size, and we exposed it to our artists. They can change it on per-level basis, but there s nothing to prevent using different angles for every pixel on the screen. 27 We accumulate the results of both intersection tests for individual spheres, by multiplying results. This is not 100% accurate and in theory can cause double occlusion, but it s not visible in practice (I don t see it even though I know what to look for). 28 Here are some more low-level detail details: We do all the intersection tests on the SPU. We start by rendering the dominant direction into a offscreen buffer. It is passed to the SPUs together with the descriptions of the occluders. SPUs divide the image into tiles and check which occluders influence each tile. Each occluder has a sphere of influence so it casts shadows only inside that sphere and we check if those spheres of influence intersect our tiles. It s pretty similar to how you do culling of lights for tiled deferred lighting. One problem is that the tiles are pretty small compared to the size of the spheres, and if you cull using typical frustum-sphere intersection test you get a lot of false positives. We eliminate them by calculating the view space bounding box of the pixels within a tile and testing this box against the sphere of influence, which is a much tighter test. Once we have the list of occluders influencing the tile, we compute the occlusion for ambient and directional components, accumulate the results for individual spheres and write out the results to a texture. This texture is used by the GPU in the main rendering pass to attenuate the lighting fetched from the lightmap. 29 For 4-5 characters on screen it takes around 6-7ms, but it s split onto 6 SPUs, so the results are ready in less than 2ms, and the GPU is doing some other stuff in the meantime anyway, so it doesn t wait for the SPUs. 30 A few more tricks to get better performance: We introduced the ellipsoid as an occluder too it s just a sphere scaled along one axis. When we test for the intersections, we transform the cone to the space of the ellipsoid and scale it down along the main axis, so the ellipsoid becomes a sphere. The direction of the cone is scaled as well, but we don t change the cone angle. We should squash it along the scaling axis, but it would cause it to become non-radially symmetric, which would make the intersection test more complicated. We leave it as is and perform the intersection as before. This is not accurate, but looks good and saves us a lot of performance, since we can greatly reduce the number of spheres we use. 31 The whole effect is rendered in ¼ resolution, but due to the low-frequency nature of those shadows, it works really well. Most objects use the result texture as is, just upscaling. We added bilateral upsample as an option for some of the objects, but it s used very sparingly, since it s a bit too costly for us. 32 For the objects that would require too many spheres to approximate, we also support precomputing occlusion information and storing it in a 3D texture. We store an average, unoccluded direction and the spread of the occluded direction. With this setup, the intersection test becomes a cone-cone intersection (which in fact is the same as cone-sphere, so we use the same lookup texture for this).the occlusion from those objects is composited on top of the regular ones. 33 To conclude: precomputed lighting is definitely not dead yet. With some relatively simple tricks you can make it look much better. Don t forget about least-squares minimization, and don t write your own linear solver for it! 34 Here are some references 35 Thanks for your attention. If you have any questions now I ll be more than happy to answer them! 36 37 38 39 40
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks