Durch Verwendung von Adaptern, sogenannten Bullets, wird mechanischer Toleranzausgleich ermöglicht bei weiterhin ausgezeichneten - PDF

Description
, and coaxial connector series are available with different locating devices, main application fields are as PCB connectors and in board-to-board connections. Die Koaxial-Steckverbinder-Serien, und werden

Please download to get full document.

View again

of 24
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information
Category:

Religion & Spirituality

Publish on:

Views: 8 | Pages: 24

Extension: PDF | Download: 0

Share
Transcript
, and coaxial connector series are available with different locating devices, main application fields are as PCB connectors and in board-to-board connections. Die Koaxial-Steckverbinder-Serien, und werden in verschiedenen Einrastmechanismen mit unterschiedlichen Festhaltekräften angeboten und werden vor allem als PCB-Steckverbinder und in Board-to-Board- Verbindungen eingesetzt. Using adaptors, so-called bullets, equalization of radial and axial misalignments is possible, maintaining constant electrical characteristics. Bullets are available in different lengths to enable any board spacing e.g. from 7.95 mm (). Durch Verwendung von Adaptern, sogenannten Bullets, wird mechanischer Toleranzausgleich ermöglicht bei weiterhin ausgezeichneten elektrischen Eigenschaften. Bullets sind in verschiedenen Längen lieferbar, wodurch Leiterplattenabstände beispielsweise ab 7,95 mm (Serie ) möglich sind. ,,, Contents Interface Dimensions Code 9 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene E K I H G E D F D A B C C A F MALE Stecker FEMALE Kuppler Male Stecker Female Kuppler dimension [mm] Smooth bore Limited detent Full detent min. max. min. max. min. max. min. max. A ) B C ) 3.43 D E F G H I K ) resilient, dimension to meet electrical and mechanical requirements coaxial connectors are available as smooth bore, catchers mitt, limited detent and full detent versions, they are suitable for a wide range of board-to-board interconnect applications up to 40 GHz - from low up to the highest mechanical loads, e. g. in telecommunication, test & measurement or aerospace applications. PCB connectors are supplied in blister tapes. -Koaxial-Steckverbinder werden in den Festhaltevarianten Smooth bore, Catchers mitt, Limited detent und Full detent angeboten und eignen sich für vielseitige Board-to- Board-Verbindungen bis 40 GHz von geringer bis zu höchster mechanischer Beanspruchung, z. B. in Telekom- und Messtechnik-Anwendungen bis zu Anwendungen in Luftund Raumfahrt. PCB-Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert. Features Interface according to US MIL-STD 348A, Fig. 326 Frequency range DC to 40 GHz Return loss (cable connector straight) 4 db (typ.) Impedance 50 Ω Minimum board-to-board distance 9.05 mm Snap-on coupling 26 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 260, D Tittmoning, Tel , Fax , Technology Technical Data Code 9 Applicable standards Anwendbare Normen Interface according to Interface gemäß MIL-STD-348A, Fig. 326 Quality tested according to Qualitätsprüfung gemäß MIL-STD-202 Electrical data Elektrische Daten Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Power handling Leistungsbelastbarkeit Contact current Kontaktstrombelastbarkeit Mechanical data Mechanische Daten 50 Ω DC to 40 GHz 4 db (typ.) 0. x f (GHz) db 5 GΩ 6 mω 2 mω 500 V rms 335 V rms GHz.2 A DC Mating cycles Steckzyklen Full detent: 00 Limited detent: 500 Smooth bore, Catchers mitt: 000 Center contact captivation Innenleiter Haltekraft Engagement force Steckkraft Disengagement force Ziehkraft Board-to-board distance (min.) Board-to-Board Abstand (min.) Environmental data Umweltdaten axial: 7 N Full detent: 68 N Limited detent: 45 N Smooth bore, Catchers mitt: 9 N Full detent: 22 N Limited detent: 9 N Smooth bore, Catchers mitt: 2.2 N 9.05 mm Temperature range Temperaturbereich -65 C to +55 C Thermal shock Temperaturzyklen MIL-STD-202, Method 07, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 06 Vibration Vibration Shock Schock Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) Materials Materialien MIL-STD-202, Method 204, Condition B MIL-STD-202, Method 23, Condition A IEC 6760-, +260 C for 0 sec. Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Crimping ferrule Crimphülse Dielectric Dielektrikum Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe, Au plating CuZn, Au plating CuZn, Au plating Copper alloy, Au plating PTFE / PEEK / LCP Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. 27 Cable Connectors Cable Connectors Semi-Rigid Cables Straight Plug, solder Panel mount; hexagonal flange xordering Number Version Remarks Cable Group Assembly Instruction Panel Piercing / PCB Layout x9 S L5 rear mount Limited detent 7 9 E4 B x9 S L5 rear mount Smooth bore 7 9 E4 B Packing Unit Semi-Rigid Cables UNS-2A ø 3.7 SW 6.35 SW 6.35 x9 S L5 Snap-in Limited detent 7 9 E ø 4.8 ø x9 S 60A-27 L5 front mount Limited detent stainless steel 7 9 E4 B ø 3 SW 6.3 SW 6.3 Straight Jack, solder xordering Number Remarks Cable Group Assembly Instruction Packing Unit x9 K L GHz 70 9 E5 00 x9 K L5 40 GHz 70 9 E3 00 x9 K 0-27 L GHz 7 9 E5 00 x9 K L5 40 GHz 7 9 E Semi-Rigid Cables ø 4 x9 K L GHz 72 9 E ø 5 Right Angle Jack, solder xordering Number Remarks Cable Group Assembly Instruction Packing Unit x9 K L GHz 70 9 E8 250 x9 K L GHz 7 9 E Semi-Rigid Cables ø Cable Connectors - Flexible Cables Straight Jack, crimp xordering Number Remarks Cable Group Assembly Instruction Crimp Inserts x9 K 02-0 L5 a = 5.7 mm 0 9 C2 W x9 K 0-02 L5 a = 6.5 mm G2 W x9 K 0-03 L5 a = 6.5 mm G2 W x9 K 02-X L5 a = 5.7 mm X 9 C2 W Packing Unit 8.7 a Flexible Cables ø 5 Right Angle Jack, solder-crimp xordering Number Remarks Cable Group Assembly Instruction Crimp Inserts x9 K L5 a = 4.05 mm 0 9 C W x9 K L5 a = 3.85 mm 02 9 C W x9 K L5 a = 4.3 mm 03 9 C W Packing Unit Flexible Cables ø a x9 K 203-3X L5 X 9 C W ø Panel Connectors Panel Connectors - Coaxial End Panel Plug, hexagonal flange Coaxial End xordering Number Remarks Packing Unit x9 S L5 Limited detent Panel feed through 00 blister UNS-2A SW 6 ø.5 Panel Plug, hermetic sealed Coaxial End xordering Number Remarks Assembly Instruction Packing Unit x9 S 8-5H0 E4 Full detent 9 G Panel Jack xordering Number Panel Piercing / PCB Layout Packing Unit x9 K L5 M 4.5 x Coaxial End.8 M 4.5 x 0.35 SW 4 SW 6 ø. 30 PCB Connectors PCB Connectors - SMD Straight Plug SMD xordering Number Version Remarks Panel Piercing / PCB Layout Packing Packing Unit x9 S 0-40M L5 Limited detent B 20 VG 0.0M00 00 blister, 500 tape & reel x9 S 0H-40M L5 Limited detent removable plastic cap on suction area for tape & reel B 20 VG 28.0M00 00 blister, 500 tape & reel x9 S 4-40M L5 Smooth bore B 20 VG 0.0M00 00 blister, 500 tape & reel x9 S 4H-40M L5 Smooth bore removable plastic cap on suction area for tape & reel B 20 VG 0.0M tape & reel x9 S 02-40M L5 x9 S 22-40M L5 Limited detent removable plastic cap on suction area for tape & reel Frequency DC to 40 GHz Limited detent, stainless steel removable plastic cap on suction area for tape & reel Frequency DC to 40 GHz please request optimized footprint for your application please request optimized footprint for your application VG 0.0M00 00 blister, 500 tape & reel 00 blister x9 S 44-40M L5 Catchers mitt B 27 VG blister, 750 tape & reel x9 S 4K-40M L5 Catchers mitt removable plastic cap on suction area for tape & reel B 27 VG tape & reel ø 6 4. x9 S 04-40M L5 Limited detent, a = 0 mm B 26 VG 24.0M00 00 blister, 500 tape & reel x9 S 0K-40M L5 Limited detent, a = 0 mm removable plastic cap on suction area for tape & reel B 26 VG 29.0M tape & reel x9 S L5 pin-in-paste Limited detent, a = 0.8 mm B blister removable plastic cap on suction area for tape & reel x9 S L5 pin-in-paste Limited detent, a = 2.5 mm B blister x9 S L5 pin-in-paste Limited detent B 22 VG 33.0M00 00 blister, 750 tape & reel x9 S 0A-400 L5 pin-in-paste Limited detent removable plastic cap on suction area for tape & reel B 22 VG blister, 500 tape & reel x9 S L5 pin-in-paste Smooth bore B 22 VG 33.0M00 00 blister, 750 tape & reel 6 5 ø 0.7 a x9 S L5 pin-in-paste Smooth bore B 22 VG 33.0M00 00 blister, 750 tape & reel ø 4.7 x9 S 4D-400 L5 pin-in-paste Smooth bore removable plastic cap on suction area for tape & reel B 22 VG tape & reel Straight Plug, Panel mount SMD xordering Number Version Remarks Panel Piercing / PCB Layout Packing Packing Unit x9 S 0D-40M L5 rear mount Limited detent B 2 VG 9.0M00 00 blister, 250 tape & reel ø 4.2 x9 S 0N-40M L5 rear mount Limited detent removable sticker on suction area for tape & reel B 2 VG 9.0M tape & reel Straight Jack/Plug Pair SMD xordering Number Remarks Panel Piercing / PCB Layout Packing Unit x9 K 0M-40M G Limited detent incl. 9S0-40M, 9K02-K00 B blister 5 ø Right Angle Plug, PCB xordering Number Remarks Panel Piercing Packing / PCB Layout x9 S 20-40M L5 x9 S 24-40M L5 Limited detent removable sticker on suction area for tape & reel Smooth bore removable sticker on suction area for tape & reel Packing Unit B 24 VG 22.0M blister, 500 tape & reel B 24 VG 44.0M blister, 500 tape & reel 5 SMD x9 S M L5 Limited detent B 25 VG 03.0M00 00 blister, 500 tape & reel x9 S M L5 Smooth bore B 25 VG 03.0M blister, 500 tape & reel PCB Connectors - Solder Pin Straight Plug, PCB xordering Number Remarks Panel Piercing Packing / PCB Layout Packing Unit x9 S L5 Limited detent B 30 VG 32.0M00 00 blister, 750 tape & reel Solder Pin x9 S L5 Smooth bore B 30 VG 32.0M00 00 blister, 750 tape & reel Right Angle Plug, PCB xordering Number Remarks Panel Piercing / Packing Unit PCB Layout x9 S L5 Limited detent B blister Solder Pin ø Adaptors Adaptors Bullet female-female xordering Number Nominal Board-to- Bullet Length 2) Minimum Board-to- Board Distance ) Board Distance 3) Maximum Radial Tolerance 4) x9 K 0-K00 L mm a=6.45 mm 9.07 mm 0.45 mm 00 x9 K 02-K00 L mm a=7.00 mm 9.62 mm 0.49 mm 00 x9 K 0-K00 L5.05 mm a=8.20 mm 0.82 mm 0.57 mm 00 x9 K 06-K00 L5.45 mm a=8.60 mm.22 mm 0.60 mm 500 x9 K 09-K00 L mm a=9.90 mm 2.52 mm 0.69 mm 500 x9 K 08-K00 L mm a=.40 mm 4.02 mm 0.80 mm 500 x9 K 4-K00 L mm a=2.59 mm 5.2 mm 0.88 mm 500 x9 K 04-K00 L mm a=6.74 mm 9.36 mm.7 mm 500 x9 K 5-K00 L mm a=9.50 mm 22.2 mm 5) 300 x9 K 7-K00 L mm a=22.39 mm 25.0 mm 5) 300 x9 K 07-K00 L mm a=23.80 mm mm 5) 300 x9 K 6-K00 L mm a=24.9 mm 26.8 mm 5) 300 Packing Unit ø 3.43 a ) When standard SMD-connectors are applied (e.g. 9 S 0-40M, 9 S 44-40M,...). 2) Bullets with special lengths on request. 3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included. 4) The maximum radial tolerance compensation is calculated by: sin(4 ) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection. 5) The maximum radial tolerance is limited to.2 mm because of the limited guide in range of the second PCB connector. Adaptors (In Series) xordering Number Version Remarks Return Loss x9 S 0-S20 D3 straight male - male calibration adaptor 26 DC to 4 GHz 20 4 GHz to 8 GHz 23.4 ø 7 x9 S 0-K20 D3 straight male - female calibration adaptor 26 DC to 4 GHz 20 4 GHz to 8 GHz 20.6 ø7 x9 K 0-K20 D3 straight female - female calibration adaptor 26 DC to 4 GHz 20 4 GHz to 8 GHz 7.8 ø7 33 Adaptors (Inter Series) xordering Number Version Remarks Return Loss x9 S 32-S00 S3 straight male - SMA male 24 ø9 x9 S 32-K00 S3 straight male - SMA female 23. ø9 x9 K 32-S00 D3 straight female - SMA male 26 ø9 x9 K 32-K00 D3 straight female - SMA female 25. ø9 x02 S 9-S00 E3 straight RPC-2.92 male - male 32 DC to 2 GHz 26 2 GHz to 26.5 GHz GHz to 40 GHz 26.8 ø 9 SW7 x02 S 9-K00 E3 straight RPC-2.92 male - female 32 DC to 2 GHz 26 2 GHz to 26.5 GHz GHz to 40 GHz 30 ø 9 SW7 x02 K 9-S00 E3 straight RPC-2.92 female - male 32 DC to 2 GHz 26 2 GHz to 26.5 GHz GHz to 40 GHz 3.8 ø 9 SW7 x02 K 9-K00 E3 straight RPC-2.92 female - female 32 DC to 2 GHz 26 2 GHz to 26.5 GHz GHz to 40 GHz 29 ø9 SW7 x03 K 79-S22 S3 straight panel RPC-3.50 female - male, full detent, 2-hole flange, floating test adaptor 30 DC to 2 GHz 20 2 GHz to 26.5 GHz 24.7 ø 20 SW6 34 Terminations Terminations Termination Plug xordering Number Remarks Return Loss Packing Unit x9 S 5R-00 E4 Watt Frequency: DC to 8 GHz 28.3 DC to GHz 20. GHz to 8 GHz.5 ø 5 Termination Jack xordering Number Remarks Return Loss Packing Unit x9 K 5R-00 E4 Watt Frequency: DC to 8 GHz 28.3 DC to GHz 20. GHz to 8 GHz 8.7 ø5 Tools Special Tools Extraction Tool xordering Number Remarks Packing Unit x9 W for connectors 20 Soldering Gauge xordering Number Remarks Packing Unit x W for connectors width of soldering gauge: a = 0.6 mm, thickness = 0.5 mm a 35 2Longwipe- Interface Dimensions Code 7 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D D MALE Stecker FEMALE Kuppler Male Stecker Female Kuppler dimension [mm] min. max. min. max. D coaxial connectors are designed for applications up to 6 GHz and enable radial tolerance compensation of ± 0.7 mm. Limited detent as well as catchers mitt types - sliding contact with expanded guide-in range - are available. -Steckverbinder sind für Anwendungen bis 6 GHz konzipiert und ermöglichen einen radialen Toleranzausgleich von ± 0.7 mm. -Stecker werden als Limited detent- und Catchers mitt-typen - gleitender Kontakt mit erweitertem Fangbereich - angeboten. Features Interface according to Rosenberger series Frequency range DC to 6 GHz Return loss (cable connector straight) 4 db (typ.) Impedance 50 Ω Minimum board-to-board distance 9.3 mm Snap-on coupling 36 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 260, D Tittmoning, Tel , Fax , Technology Technical Data Code 7 Applicable standards Anwendbare Normen Interface according to Interface gemäß Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Mechanical data Mechanische Daten Rosenberger MIL-STD Ω DC to 6 GHz 4 db (typ.) 0. x f (GHz) db 5 GΩ 6 mω 2 mω 500 V rms 335 V rms Mating cycles Steckzyklen Full detent: 00 Limited detent: 500 Smooth bore, Catchers mitt: 000 Center contact captivation Innenleiter Haltekraft Engagement force Steckkraft Disengagement force Ziehkraft Board-to-board distance (min.) Board-to-Board Abstand (min.) Environmental data Umweltdaten axial: 7 N Full detent: 68 N Limited detent: 45 N Smooth bore, Catchers mitt: 9 N Full detent: 22 N Limited detent: 9 N Smooth bore, Catchers mitt: 2.2 N 9.3 mm Temperature range Temperaturbereich -65 C to +55 C Thermal shock Temperaturzyklen MIL-STD-202, Method 07, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 06 Vibration Vibration Shock Schock Max. soldering temperature (PCB connectors) Max. Löttemperatur (Leiterplattensteckverbinder) Materials Materialien MIL-STD-202, Method 204, Condition B MIL-STD-202, Method 23, Condition A IEC 6760-, +260 C for 0 sec. Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Dielectric Dielektrikum Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe, Au plating CuZn, Au plating CuZn, Au plating PTFE Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. 37 PCB Connectors PCB Connectors - SMD Straight Plug xordering Number Remarks Panel Piercing / PCB Layout Packing Packing Unit x7 S 0-40M L5 Limited detent B 20 VG 0.0M00 00 blister, 500 tape & reel 4. SMD 5 x7 S 44-40M L5 Catchers mitt B 27 VG blister, 750 tape & reel Adaptors Masterpage-Wechsel: Right or Left (col) Adaptors Bullet female-female xordering Number Nominal Board-to- Bullet Length 2) Minimum Board-to- Board Distance ) Board Distance 3) Maximum Radial Tolerance 4) x7 K 7-K02 L mm a=6.65 mm 9.3 mm 0.46 mm 500 x7 K 7-K03 L mm a=2.00 mm mm 5) 00 x7 K 7-K04 L mm a=36.70 mm mm 5) 00 Packing Unit ø 4.45 a ) When standard SMD-connectors are applied (e.g. 7 S 0-40M, 7 S 44-40M,...). 2) Bullets with special lengths on request. 3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included. 4) The maximum radial tolerance compensation is calculated by: sin(4 ) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection. 5) The maximum radial tolerance is limited to.2 mm because of the limited guide in range of the second PCB connector. 39 3Mini- Interface Dimensions Code 8 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene E H G H B D C B A MALE Stecker F FEMALE Kuppler Male Stecker Female Kuppler dimension [mm] Smooth bore Full detent min. max. min. max. min. max. A B ) C 2.79 D E F G H ) Dimension to meet mechanical / electrical requirements connectors are extremely small coaxial connectors - approx. 70% of size - for applications up to 65 GHz, mainly high-speed signal transmission, e.g. 0 or 40 Gbit/s. Plugs are available as smooth bore-versions - for plug-in technology and back plane applications - and as vibration-resistant full detent types for highest mechanical loads, e.g. in aerospace engineering. coaxial connectors are mateable with GPPO (Gilbert Engineering Co., Inc.) and S (Connector Devices, Inc.) series. PCB connectors are supplied in blister tapes. -Steckverbinder sind extrem kleine Koaxial-Steckverbinder - 70% Baugröße im Vergleich zu - für Anwendungen bis 65 GHz. Hauptanwendung ist die Übertragung von Hochgeschwindigkeitssignalen, z. B. bei 0 oder 40 Gbit/s. Stecker werden als Smooth bore-ausführung - für Einschubtechnik- und Back Plane -Anwendungen - und als vibrationsstabile Full detent-bauformen für höchste mechanische Beanspruchungen, z.b. in Luft- und Raumfahrt, angeboten. -Koaxial-Steckverbinder sind steckkompatibel mit den Steckverbinder-Serien GPPO (Gilbert Engineering Co., Inc.) und S (Connector Devices, Inc.), PCB- Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert. Features Interface according to US MIL-STD 348A, Fig. 328 Frequency range DC to 65 GHz Return loss (cable connector straight) 6 DC to 26.5 GHz Impedance 50 Ω Minimum board-to-board distance 7.95 mm Snap-on coupling 40 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 260, D Tittmoning, Tel , Fax , T
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks